In Schipkau in Brandenburg was connected to the grid on 19 November 2026, and is described by its developer as the world’s tallest wind turbine. Its rotor blades reach a height of 365 metres. Its operation is intended to show how much extra electricity wind turbines can generate at greater heights, and whether the technical effort involved is worthwhile.
The high-altitude wind tower stands in an existing wind farm in Lusatia. Its hub, the centre of the rotor, is 300 metres above the ground. This is considerably higher than on conventional wind turbines. At this height, the wind is stronger and more consistent than lower down, where obstacles such as forests can slow the airflow. The structure is therefore expected to generate electricity over longer periods.
The test facility was built by Dresden-based Gicon Group in collaboration with the Federal Agency for Breakthrough Innovation. The idea originated with Leipzig engineer Horst Bendix , who died in 2023. According to Mitteldeutscher Rundfunk, construction cost around €25 million and was funded by the agency.
The tower also differs structurally from many other wind turbines. Rather than a solid tower, the structure is supported by a steel lattice. During construction, two tower sections were fitted inside one another, and the inner section, with the generator and rotor, was raised to the intended height. According to MDR, it can be lowered again for maintenance.
The turbine has a capacity of 3.8 megawatts. This figure describes its output, not the amount of electricity generated over a year. Generation depends on how often and how strongly the wind blows. Gicon expects almost twice the energy yield of a conventional turbine with the same rotor diameter. Whether these expectations are borne out in operating conditions remains to be seen.
The potential increase in yield comes with high construction costs. According to rbb, the costs of such exceptionally tall turbines are about four times as high. An economic assessment therefore depends not just on the height record, but also on how much electricity the turbine actually generates over its operating life and what costs are incurred.
The company also sees an opportunity to make better use of existing wind farms: taller and shorter turbines could be combined at one site. Whether and where this is practical depends on the individual project. For now, the prototype in Schipkau will provide operational experience.
Lusatia was long shaped by lignite mining and is increasingly turning to renewable energy. Construction of the high-altitude wind tower was delayed; it was originally scheduled to be commissioned in 2025. The turbine reached its final height at the end of September 2026. Its grid connection now marks the start of the period in which its expected electricity yield can be assessed.
Editor: Mira Cadena (Article created with AI assistance).